Plan your hike on the map
Open the route measuring tool, click the points of your hike and switch on automatic routing for trails and roads. You see the length, the elevation profile and total ascent and descent. These three values are what you need to estimate the time.
The rule of thumb for hiking time
A commonly used rule of thumb assumes 4 km per hour on level ground (2.5 mph), 300 metres of ascent per hour (about 1,000 ft) and 500 metres of descent per hour. The horizontal time and the vertical time are combined like this: the larger value counts in full, the smaller one by half. The calculator below applies exactly that.
This is a guideline, not a guarantee: breaks, terrain, pack weight and fitness change the time considerably.
Hiking time calculator
Estimated walking time (without breaks): –
Rule of thumb: 4 km/h horizontal, 300 m/h ascent, 500 m/h descent; the larger value counts in full, the smaller by half.
Tips for planning
- Add breaks on top of pure walking time.
- In winter, on wet ground or with a heavy pack you will be slower.
- Download the route as GPX to your phone or watch so you do not depend on reception for the map.
- Check the weather and plan the way back and possible shortcuts.
Discover trails
The hiking pages list public trails by place, with length and elevation profile.
Frequently asked questions
How long does a 10 km hike take?
On level ground, roughly two and a half hours of walking time. Every metre of ascent adds time; 300 metres of ascent cost about an hour. The calculator on this page gives you the exact estimate.
How do I find the elevation gain of my route?
The elevation profile below the map shows ascent and descent of the measured route. The values come from elevation data and are an approximation.
How do I measure a hiking trail?
Click the points of your hike on the map, with automatic routing on for trails. Length and elevation profile appear immediately.